Ricoh D017 Service Manual page 945

Communication Switch 18 (SP No. 1-104-025)
No Function
0-4 Not used
IP-Fax dial-in routing selection
5 0: Off
1: On
PSTN 2 dial-in routing
6 0: Off
1: On
PSTN 3 dial-in routing
7 0: Off
1: On
Communication Switch 19 - Not used (do not change the settings)
Communication Switch 1A - Not used (do not change the settings)
Communication Switch 1B (SP No. 1-104-028)
No Function
Extension access code (0 to 7)
to turn V.8 protocol On/Off
0-7
0: On
1: Off
SM
Comments
Do not change the settings.
1: Transfers received data to each IP-Fax dial-in
number.
The IP-Fax dial-in number is a 4 digit-number.
Enables or disables the dial-in routing for PSTN 2
connection.
Enables or disables the dial-in routing for PSTN 3
connection.
Comments
If the PABX does not support V.8/V.34 protocol
procedure, set this bit to "1" to disable V.8.
Example: If "0" is the PSTN access code, set bit 0
to 1. When the machine detects "0" as the first
dialed number, it automatically disables V.8
protocol. (Alternatively, if "3" is the PSTN access
code, set bit 3 to 1.)
127
Bit Switches - 3
D361/D510