Ricoh D017 Service Manual page 249

4.9.10 HDD
1. Before you replace the HDD:
Stop all SDK applications, and then remove it from the machine if the VM card is
installed ( p.2-102 "HDD Encryption Unit").
Insert an SD card in SD card slot 2 (lower slot).
Go into the SP mode.
Do SP5846 51 to upload the address book data to the SD card.
If the HDD is damaged, you may not be able to retrieve this data from the HDD.
2. Remove the controller board. (
3. Remove the HDD and bracket [A] (
4. Remove the old HDD [A] from its bracket (
5. Install the new HDD unit.
6. Cycle the machine power off/on.
7. Format the HDD with SP5832-1.
8. Do SP5853 to copy the preset stamp data from the firmware to the hard disk.
9. Do SP5846-52 to restore the address book data to the HDD.
D017/D018/D019/D020/D084/D085
p.4-58)
x1)
x4, x2).
4-69
PCBs and Other Items
SM