Ricoh D017 Service Manual page 901

No Function
Automatic port selection
0
0: Disabled, 1: Enabled
1-3 Not used
Dialing on the ten-key pad when
the external telephone is
4
off-hook
0: Disabled 1: Enabled
On hook dial
5
0: Disabled 1: Enabled
6-7 Not used
System Switch 0B - Not used (Do not change the factory settings.)
System Switch 0C - Not used (Do not change the factory settings.)
System Switch 0D - Not used (Do not change the factory settings.)
SM
System Switch 0A (SP No. 1-101-011)
When "1" is selected, a suitable port is
automatically selected if the selected port is not
used.
Do not change these settings.
0: Prevents dialing from the ten-key pad while
the external telephone is off-hook. Use this
setting when the external telephone is not by
the machine, or if a wireless telephone is
connected as an external telephone.
1: The user can dial on the machine's ten-key
pad when the handset is off-hook.
0: On hook dial is disabled.
Do not change the factory settings
83
Bit Switches - 1
Comments
D361/D510