LCT (B391)
1.
Remove the strips of tape.
2.
Set the copier [A] on the LCT [B].
When installing the copier, Be careful not to pinch the cable [C].
3.
Remove the connector cover [A] (rivet screw x 1).
4.
Connect the cable [B] to the copier, as shown.
5.
Attach a securing bracket [C] to each side of the LCT, as shown (
6.
Re-install the connector cover.
SM
2-22
D017/D018/D019/D020/D084/D085
x 1 each).