System SP Tables-5
23 Active IPv4 Gateway Address
This SP allows you to confirm the IPv4 default gateway setting that was used
when the machine started up with DHCP. For example, if the setting for the
IPv4 gateway is "0C0A80001h" this is displayed as "192.168.000.001".
50 1284 Compatibility (Centro)
Enables and disables bi-directional communication on the parallel connection
between the machine and a computer.
[0 to 1/1]
0:Off
1: On
52 ECP (Centro)
Disables and enables the ECP feature (1284 Mode) for data transfer.
[0 to 1/1]
0: Disabled
1: Enabled
65 Job Spooling
Switches job spooling on and off.
0: No spooling, 1: Spooling enabled
66 Job Spool Clear: Start Time
This SP determines whether the job interrupted at power off is resumed at the
next power on. This SP operates only when SP5828 065 is set to 1.
1: Resumes printing spooled jog.
0: Clears spooled job.
69 Job Spool Protocol
This SP determines whether job spooling is enabled or disabled for each
protocol. This is a 8-bit setting.
0
LPR
1
FTP (Not Used)
D017/D018/D019/D020/D084/D085
4
BMLinks (Japan Only)
5
DIPRINT
4-108
SM Appendix