Ricoh D017 Service Manual page 840

Error Codes
Code Meaning
Non-standard post
0-14 message response code
received
The other terminal is not
0-15 capable of specific
functions.
CFR or FTT not detected
after modem training in
0-16
confidential or transfer
mode
D361/D510
Suggested Cause/Action
Check the FCU - NCU connectors.
Incompatible or defective remote terminal; try
sending to another machine.
Noisy line: resend.
Try adjusting the tx level and/or cable
equalizer settings.
Replace the NCU or FCU.
Cross reference
See error code 0-08.
The other terminal is not capable of accepting
the following functions, or the other terminal's
memory is full.
Confidential rx
Transfer function
SEP/SUB/PWD/SID
Check the line connection.
Check the FCU - NCU connectors.
Replace the NCU or FCU.
Try adjusting the tx level and/or cable
equalizer settings.
The other end may have disconnected, or it
may be defective; try calling another machine.
If the rx signal level is too low, there may be a
line problem.
Cross reference
See error code 0-08.
22 SM