Ricoh D017 Service Manual page 553

System SP Tables-5
Delivery Server Setting
5845
These are delivery server settings.
FTP Port No.
1
[0 to 65535/1]
IP Address (Primary)
Use this SP to set the Scan Router Server address. The IP address under the
2
transfer tab can be used with the initial system setting.
[0 to FFFFFFFF/1]
Delivery Error Display Time
Use this setting to set the length of time that the message is shown when a
6
test error occurs during document transfer with the NetFile application and an
external device.
[0 to 999/1]
IP Address (Secondary)
Sets the IP address that is given to the computer that is the secondary
8
delivery server for Scan Router. This SP lets you set only the IP address, and
does not refer to the DNS setting.
Delivery Server Model
Lets you change the model of the delivery server that is registered by the I/O
device.
[0 to 4/1]
9
0: Unknown
1: SG1 Provided
2: SG1 Package
3: SG2 Provided
4: SG2 Package
Delivery Svr. Capability
10
Changes the functions that the registered I/O device can do.
D017/D018/D019/D020/D084/D085 4-120 SM Appendix