Ricoh D017 Service Manual page 982

NCU Parameters
Address
Time waited when a pause is
68054F
entered at the operation panel
680550 DTMF tone on time
680551 DTMF tone off time
Tone attenuation level of DTMF
680552
signals while dialing
Tone attenuation value
difference between high
680553
frequency tone and low
frequency tone in DTMF signals
PSTN: DTMF tone attenuation
680554
level after dialling
ISDN: DTMF tone attenuation
680555
level after dialling
680556 Not used
Time between 68054Dh (NCU
680557 parameter 14) and 68054Eh
(NCU parameter 15)
680558 Not used
D361/D510
Function
164
Unit
SP2-103-017 (parameter
16). See Note 3.
SP2-103-018 (parameter
17).
1 ms
SP2-103-019 (parameter
18).
SP2-103-020 (parameter
-N x 0.5 –3.5
19).
dBm
See Note 5.
SP2-103-021 (parameter
20).
The setting must be less
-dBm x 0.5 than –5dBm, and should
not exceed the setting at
680552h above.
See Note 5.
-N x 0.5 –3.5 SP2-103-022 (parameter
dBm 21). See Note 5.
-dBm x 0.5 See Note 5
Do not change the
settings.
This parameter takes
1 ms effect when the country
code is set to France.
Do not change the
setting.
Remarks
SM