Ricoh D017 Service Manual page 239

[C] Controller board unit (
Before touching the controller board, always touch a metal surface to discharge
any static that has accumulated on your hands.
2. Remove:
[A] Faceplate ( x3)
[B] Controller board (
Make sure that the thermal conductive sheet [C] is attached to the bracket after
replacement of this procedure.
3. Remove:
[A] Upper brace
[B] Lower brace
[C] NVRAM x2
4. Remove the NVRAMs from the old board and install them on the new board.
D017/D018/D019/D020/D084/D085
x3)
x4)
4-59
PCBs and Other Items
SM