Ricoh D017 Service Manual page 209

4.5.6 DEVELOPER
1. Spread the vinyl sheet provided with the developer kit on a flat surface.
2. Separate the top and bottom parts of the PCU. (
3. Set the bottom on the vinyl sheet.
4. Remove the front screw [A] (
5. Remove the rear screws [B] (
6. Release the front tab [C].
7. Release the rear tab [D].
8. Separate the top [E] and bottom [F] of the development unit.
9. Turn the gears [G] to remove the developer from the bottom half.
D017/D018/D019/D020/D084/D085
p.4-25 "OPC Drum")
x1)
x2).
4-29
Photoconductor Unit (PCU)
SM