Ricoh D017 Service Manual page 159

15. Check the display and make sure that the overwrite erase icon [A] is displayed.
16. Make a Sample Copy.
17. Check the overwrite erase icon.
The icon [B] changes to [C] when job data is stored in the hard disk.
The icon goes back to its usual shape [B] after this function has completed a data
overwrite operation to the hard disk.
18. Do SP5990-005 (SP print mode - Diagnostic Report).
19. Look at the report:
Under "[ROM No./Firmware Version]" check the number and version number listed
for "HDD Format Option".
Under "[Loading Program]" check the option number and version number listed for
"GW_zoffy".
These two version numbers should be identical.
20. Exit SP mode.
D017/D018/D019/D020/D084/D085 2-113
Controller Options
SM