Ricoh D017 Service Manual page 158

Controller Options
5. Remove the plastic application cover [A] (
6. Insert the SD card [B] in SD Slot 1 (upper).
7. Reconnect the network cable, if the network is connected to the copier.
8. Turn the main power switch on.
9. Do SP5878-1 (Option Setup – Data Overwrite Security) and touch [EXECUTE].
10. Go out of the SP mode, turn the operation switch off, then turn the main power switch
off.
11. Turn the machine power on.
12. Make sure the ROM number and firmware version in area [a] of the diagnostic report
are the same as those in area [b].
[a]: "ROM Number/Firmware Version" – "HDD Format Option"
[b]: "Loading Program" - "GW5a_zoffym"
Diagnostic Report:
DataOverwriteSecurity Unit
13. Push [User Tools] and select System Settings> Administrator Tools> Auto Erase
Memory Setting> On.
14. Exit from User Tools mode.
SM
x1).
"ROM No. / Firmware
Version" [a]
HDD Format Option:
D3775912A / 1.01m
2-112
"Loading Program" [b]
GW5a_zoffym:
D3775912A / 1.01m
D017/D018/D019/D020/D084/D085