Ricoh D017 Service Manual page 166

Controller Options
Main Units
The three main units are:
RPCS Printer Unit Type 3350. For customers who require only basic copying and
printing and the RPCS printer language. The HDD is not required but the 256 MB
memory must be installed.
Printer Unit Type 3350. For customers who do not require the extended scanning
features but need more printing capability (both RPCS and PCL printer languages are
provided). The 256 MB memory is required.
Printer/Scanner Unit Type 3350. For customers who require the full range of DS
features (advanced scanning and printing features such as "scan-to" solutions, virtual
mailboxes, PCL, etc.). The 256 MB memory unit is required.
Separate Options
There are three separate options: HDD, 256 MB memory and PS3.
HDD. Provided with the following kits: Printer Enhance Option, Printer Unit, and
Printer/Scanner Unit. Refer to the illustration above. If an HDD has already been
installed as a separate item, the HDD unit in the machine does not need to be replaced
with the HDD from the kit.
256 MB memory. Not provided with any option. However, every unit (RPCS, Printer
Unit, P/S unit) requires installation of the 256 MB memory.
PostScript 3 Unit. The PS3 option can be used with the RPCS Unit, the Printer Unit, or
the Printer/Scanner Unit.
Enhance Options
There are two enhance options:
Printer Enhance Option Type 3350. Updates the RPCS unit by adding PCL.
Scanner Enhance Option Type 3350. Updates the RPCS unit or Printer Unit by adding
the advanced scanning features.
SM 2-120 D017/D018/D019/D020/D084/D085