Ricoh D017 Service Manual page 279

Rev. 02/08/2012
5.2 FIRMWARE UPDATE
The procedure is the same for all firmware modules.
⇒
Before you start the firmware upgrade procedure, make sure that the machine is
disconnected from the network. This is to prevent a print job from being received while the
upgrade is in progress.
If you will change scanner firmware, print 5-990-22 and -23 (SMC reports for
scanner settings) before you start this procedure.
1. Stop all SDK applications if the VM card is installed (
Unit").
2. Turn off the main power switch.
3. Remove the plastic application cover [A] (
4. Remove the VM card from SD card slot 2 if it is installed.
5. Insert the SD card [B] containing the software you wish to download into SD card slot 2
(lower slot).
6. Open the front cover.
7. Turn on the main power.
8. Follow the instructions on the operation panel
D017/D018/D019/D020/D084/D085
p.2-102 "HDD Encryption
x 1).
5-15
Firmware Update
SM