Dell Networking 2024 Reference Manual page 129

Command
host
ip dhcp bootp automatic
ip dhcp conflict logging
ip dhcp excluded-address
ip dhcp ping packets
lease
netbios-name-server
netbios-node-type
network
next-server
option
service dhcp
sntp
show ip dhcp binding
show ip dhcp conflict
show ip dhcp global
configuration
show ip dhcp pool
Description
Specifies a manual binding for a DHCP client
host.
Enables automatic BOOTP address
assignments.
Enables DHCP address conflict detection.
Excludes one or more DHCP addresses from
automatic assignment.
Configures the number of pings sent to detect if
an address is in use prior to assigning an address
from the DHCP pool.
Sets the period for which a dynamically
assigned DHCP address is valid.
Configures the IPv4 address of the Windows
Internet Naming Service (WINS) for a
Microsoft DHCP client.
Sets the NetBIOS node type for a Microsoft
DHCP client.
Defines a pool of IPv4 addresses for distributing
to clients.
Sets the IPv4 address of the TFTP server to be
used during auto-install.
Supplies arbitrary configuration information to
a DHCP client.
Enables local IPv4 DHCP server on the switch. GC
Sets the IPv4 address of the NTP server to be
used for time synchronization of the client.
Displays the configured DHCP bindings.
Displays DHCP address conflicts for all relevant
interfaces or a specified interface.
Displays the DHCP global configuration.
Displays the configured DHCP pool or pools.
®
Command Groups
a
Mode
DP
GC
GC
GC
GC
DP
DP
DP
DP
DP
DP
DP
PE
PE
PE
UE or
PE
129