Update The Software; Update The Software By Flash Rom Writer - Muratec F-360 Field Engineering Manual

3.22 Update the software

3.22.1 Update the software by Flash ROM writer

Here's instructions on how to update the software version of the Flash ROM.
Important: To update the software, it needs the flash ROM writer and four (or six) of the latest versions of
EPROMs — ROM0, ROM1, ROM2, ROM3, CGROM0 and CGROM1.
1. Turn off the power switch.
2. If you will update six ROMs (ROM0 – CGROM1), set JP1 to ON.
If you will update only four ROMs (ROM0 - ROM3), set JP1 to OFF.
And confirm the BOOT ROM is set correctly.
3. If you will update CGROMs, set the six ROMs to the Flash ROM writer.
If you will not update CGROMs, set the four ROMs (ROM0, ROM1, ROM2 and ROM3) to the Flash ROM
writer.
Note: Be careful of the direction of the ROMs when you attach them.
4. Remove the Access cover and connect the cables as follows:
Flash ROM writer
P1 <---------------------> P14A
P2 <---------------------> P14C
Main control PCB
3-129