Lcd Test; Key Panel Test - Muratec MFX-1600 Field Engineering Manual

3.13.3 LCD Test

This mode displays two test patterns in LCD.
1. Press Program key, *, B(02). Then press One-touch C(03).
LCD Test
Pressing START, all dots turn on.
Next pressing START, all dots turn off.
Finally pressing START, the alphabetical characters are shown in the LCD.
ABCDEFGHIJKLMNOPQRST
UVWXYZabcdefghijklmn
2. Press STOP to exit the test mode.

3.13.4 Key Panel Test

1. Press Program key, *, B(02). Then press One-touch D(04).
Key Panel Test
2. As each button on the keypad is pressed, a representative name as show in the following table will be
displayed.
Key
DOCUMENT
RESOLUTION
CONTRAST
DOCUMENT SIZE
PAPER SIZE
NEXT DOC
CANCEL
ENTER
P (Program key)
SPEED DIAL
/TEL INDEX
REVIEW
COMMANDS
3. Press STOP twice to cancel the key panel test.
Indication in LCD
Document/Resolution
Contrast
Doc Size
Paper Size/Next Doc
Cancel
Enter
Program
Speed
Review Command
3-67
Key
COPY RESET Copy Reset
START Start
STOP Stop
Soft key 1 and 2 Soft Key 1 and 2
REDIAL/PAUSE Redial
DIALING Dialing Op.
OPTIONS
BROADCAST Broadcast
GROUP Group
ADVANCED Advanced Functions
FUNCTIONS
Macro keys M1 and M2
Numeric keys 0 0 through #
through #
One-touch keys 01 [01] through [55]
through 55
Programmable One- [P1] and [P2]
touch keys P1 and
P2
Indication in LCD