Replacing The Feed Roller - Konica Minolta bizhub C353P Service Manual

Hide thumbs Also See for bizhub C353P:

Table of Contents

Field Service Ver. 1.0 Oct. 2007

Replacing the feed roller

A. Periodically replaced parts/cycle

• Feed roller: Every 300,000 prints

• Replace the separation roller assy, feed roller and pick-up roller at the same time.

B. Replacing procedure

1. Remove the right door.

2. Remove the rear cover and the rear right cover.

A093F2C500DA

A093F2C509DA

A093F2C010DA

3. Periodical check

3. Remove two screws [1] and separa-

tion roller mounting bracket assy [2].

4. Insert a driver into the hole [1] at the

back of the feed tray and pull out the

paper feed tray.

5. Remove two wire saddles [1] and

four screws [2], and remove the

paper feed unit [3].

Table of Contents