Konica Minolta bizhub C353P Service Manual page 226

Field Service Ver. 1.0 Oct. 2007
B. Paper Settings
(1) Paper Tray
Functions • To set the paper feed tray when not specified by the printer driver during PC printing.
Use • To use when paper feed tray cannot be specified by the printer driver when printing
from Windows DOS, etc.
Setting/
• The default setting is Auto.
Procedure
(2) Paper Size
Functions • To set the paper size when not specified by the printer diver during printing.
Use • To use when the paper size cannot be specified by the printer driver during printing
from Windows DOS, etc.
(3) 2-Sided Print
Functions • To set whether to carry out duplex print during PC printing when not specified by the
printer driver.
Use • To use when 2-sided printing cannot be specified by the printer driver while printing
by Windows DOS, etc.
Setting/ • The default setting is OFF.
Procedure
(4) Binding Position
Functions • To set the binding direction during duplex printing when not specified by the printer
driver during PC printing.
Use • To use when binding direction cannot be specified by the printer driver during printing
by Windows DOS, etc.
Setting/ • The default setting is Left Bind.
Procedure
(5) Staple
• The menu is available only when the optional finisher FS-519 is mounted.
Functions • To set whether to staple or not when not specified by the printer driver during PC
printing.
Use • To use hen staple is not specified by the printer driver during printing by the Windows
DOS, etc.
Setting/ • The default setting is OFF.
Procedure
ON
Top Bind
1 Position
"OFF"
"Left Bind"
2 Positions
13. Utility Mode
Right Bind
"OFF"
181