4. Other
4.4.6
Middle guide
1. Remove the finisher unit.
See P.30
2. Remove the finisher unit rear cover.
See P.22
3. Remove the finisher unit upper cover.
See P.23
[1]
[1]
[3]
[5]
[6]
[1]
24
[2]
A01GF2C528DA
[2]
9J08F2C013DA
[4]
[2]
[3]
A01GF2C529DA
Field Service Ver. 1.0 Oct. 2007
4. Remove the harness bundle [1] from
three harness guides [2].
5. Remove the screw [1] and tab [2],
and remove the harness guide [3].
6. Remove the screw [1] and the
ground wire.
7. Remove the wire saddle [2] and
edge cover [3], and disconnect the
connector [4].
8. Remove the shoulder screw [5] and
remove the middle guide [6].