Auth. Device Setting; Inferior Cut - Konica Minolta bizhub C353P Service Manual

Field Service Ver. 1.0 Oct. 2007
15.3.19

Auth. Device Setting

• It will not be displayed when [HDD Installation] is set to "Not Installed".
• It will be displayed only when the following setting shows that [General Settings] is set to
"ON (MFP)".
PageScope Web Connection → [Administrator mode] → [Security] → [Authentication] →
[User Auth/Account Track]
Functions • To set whether or not the authentication device is installed.
Use • Set when the authentication unit (biometric type or card type) is mounted.
Biometric : Uses biometrics (finger vein) authentication system
Card
• When selecting biometrics, set a film timeout interval.
Setting/ <Auth. Mode>
Procedure • The default setting is Not Installed.
<Shooting Timeout>
• The default setting is 10 sec.
15.3.20

Inferior Cut

Functions • Individual units and options have a set or unset setting for the trouble isolation func-
tion.
Use • When a problem occurs, this function enables the continuous use of the units that are
not affected by separately controlling them and isolating other units that have a prob-
lem.
• The machine isolates only units that have a "ON" setting.
NOTE
• The malfunction detection mechanism is not applied to units and options that
are being isolated.
• This function can be selected for the following units and options.
Tray 1, Tray 2, Tray 3, LCT, manual, Half-Fold/Tri-Fold Center Stapling and Staple.
Setting/ • The default setting is OFF for individual units and options.
Procedure
• After changing the setting and turn the power switch OFF and ON to make the new
setting effective.
: Uses IC card authentication system
Card Biometric
10 sec (5 to 60 sec)
ON
15. Service Mode
"Not Installed"
"OFF"
245