Konica Minolta bizhub C353P Service Manual page 267

13. Utility Mode
B. Finisher Adjustment
(1) Center Staple Pos
See P.33 of the SD-505 service manual.
(2) Half-Fold Pos.
See P.30 of the SD-505 service manual.
C. Density Adjustment
(1) Thick Paper Image Density-Yellow, Magenta, Cyan, Black
Functions • To fine-adjust density of printed images of each color for thick paper and OHP trans-
parencies. (Only black color adjustable for OHP transparencies)
Use • To change the density of the printed image for each color with thick paper and OHP
transparencies
Adjustment
Range
Adjustment
Light color: Press the
Instructions
Dark color: Press the
Adjustment 1. Call the Admin. Settings to the screen.
2. Select [Expert Adjustment] → [DensityAdjustment].
Procedure
3. Select a type of thick paper and a color that need to be adjusted.
4. Press the
(2) Black Image Density
Functions • To fine-adjust the density of the printed image for a black print.
Use • To vary the density of the printed image of a black print.
Adjustment
Range
Adjustment
If the black is light, press the
Instructions
If the black is dark, press the
Setting/ 1. Call the Admin. Settings to the screen.
2. Select [Expert Adjustment] → [Density Adjustment] → [BlackImageDensity].
Procedure
3. Press the
D. Stabilization
(1) Initialize+Stabi.
Functions • To carry out an image stabilization sequence after the historical data of image stabili-
zation control has been initialized.
Use • Use if an image problem persists even after [Gradation Adjustment] has been exe-
cuted.
• Use if tone reproduction and maximum density are faulty even after image stabiliza-
tion has been executed.
Setting/ 1. Call the Admin. Settings to the screen.
2. Select [Expert Adjustment] → [Stabilization] → [Initialize+Stabi.].
Procedure
3. Press the Menu/Select key to start Stabilizer.
The LED line turns off during the Stabilizer sequence.
4. Stabilizer is completed when the LED line turns blue.
222
Lighter (5 steps), "Std", Darker (5 steps)
key.
key.
or key to correct the image density.
Lighter (2 steps), "Std", Darker (2 steps)
key.
key.
or key as necessary to correct the image density.
Field Service Ver. 1.0 Oct. 2007