Feed Section; Replacing The Tray1 Feed Roller - Konica Minolta bizhub C25 Service Manual

Field Service Ver. 1.1 May 2011
4.4

Feed section

4.4.1

Replacing the tray1 feed roller

A. Periodically replaced parts/cycle
• Tray1 feed roller: Every 300,000 counts
B. Procedure
1. Remove the tray1.
See P.47
2. Open the right door.
[1]
[2]
[3]
[1]
4. PERIODICAL MAINTENANCE PROCEDURE
A2YFF2C044DA
[2]
[1]
A0VDF2C001DA
[2]
A0VDF2C003DA
3. Detach the spring [1] from the hook
[2] in order to unlock the plate.
4. Remove six screws [1], and remove
the tray1 feed roller assy [2].
5. Remove the E-ring [1] and the bear-
ing [2], and move the tray 1 feed
roller assy [3] in the direction of the
arrow.
21