Setup Confirmation; Calling The Maintenance - Konica Minolta bizhub C353P Service Manual

Hide thumbs Also See for bizhub C353P:

Table of Contents

15. Service Mode

Setup confirmation

• Follow the steps below to make sure that CS Remote Care has been properly set

1. Call the Service Mode to the screen.

2. Select [CS Remote Care].

3. Check to make sure that only selected item is displayed.

• When CE starts maintenance, inputting the ID code of CE (seven digits: numbers which

CE can identify. They are controlled by the distributor.) will transmit the information to the

Center side and tells that the maintenance has started. When the maintenance is fin-

ished, select [Maintenance Done] → [Start], press the Menu/Select key will transmit the

information to the center and tells that it is finished.

A. When starting the maintenance

1. Select [Service Mode] → [CS Remote Care].

2. Select [ID Code], and input ID Code.

3. Press the Menu/Select key.

* The Start key blinks while maintenance is being carried out.

B. When finishing the maintenance

1. Select [Service Mode] → [CS Remote Care].

2. Select [Maintenance Done] → [Start], and press the Menu/Select key.

Field Service Ver. 1.0 Oct. 2007

Table of Contents