16. Jig Software
16.2 Calling the Service Mode to screen
NOTE
• Given in the following are only those adjustments that are made using the external
panel controller.
• Ensure appropriate security for Service Mode setting procedures. They should
never be known to any unauthorized person not involved with service jobs.
1. Click the Utility key.
2. Click [Check Details].
3. Press the following keys in this order:
Stop → 0 → 0 → Stop → 0 → 1
4. Service mode will be displayed.
16.2.1
Exiting
• Click the [Exit] key.
298
Field Service Ver. 1.0 Oct. 2007