Replacing The Cleaning Pad - Konica Minolta bizhub C353P Service Manual

3. Periodical check
3.1.2

Replacing the cleaning pad

A. Periodically replaced parts/cycle
• Cleaning pad: Every 800,000 prints
B. Procedure
1. Remove the finisher unit.
See P.30
+ -
12
[1]
[2]
A01GF2C550DA
[1]
A01GF2C552DA
A01GF2C551DA
Field Service Ver. 1.0 Oct. 2007
2. Remove the screw [1] and remove
the cleaning pad [2].
3. Peel off the cleaning pad [1].
4. To reinstall, reverse the order of
removal.
NOTE
• Before attaching a new cleaning
pad, clean the metal surface where
the new cleaning pad is attached.
• Align the right ends of the new
cleaning pad and the metal as
shown in the illustration.