Electrical/Image Adjustment; Calling The Service Mode To Screen; List Of Functions - Konica Minolta bizhub C353P Service Manual

9. Electrical/image adjustment

9. Electrical/image adjustment
NOTE
• Given in the following are only those adjustments that are made using the external
panel controller.
• Ensure appropriate security for Service Mode setting procedures. They should
never be known to any unauthorized person not involved with service jobs.
9.1

Calling the Service Mode to screen

1. Connect the straight cable to the printer and PC.
2. Turn the PC power ON.
3. Turn the printer power ON.
4. Start the jig software and check the startup screen changes into the control panel
screen.
5. Click the Utility key.
6. Click [Check Details].
7. Press the following keys in this order:
Stop → 0 → 0 → Stop → 0 → 1
8. Service mode will be displayed.
9.2

List of functions

• Use the jig software and adjust or set on the PC screen.
• For adjustment items except X-Rite calibration, see Adjustment/Setting.
NOTE
• When customer needs high-quality color printing, performing calibration with X-
Rite is recommended.
Machine
• Change Warm Up Time
• Fusing Transport Speed
• Printer Resist Loop
• Fusing Loop Size
• Manual Bypass Tray Adjustment *
Imaging Process Adjustment
• X-Rite Calibration (Gradation Adjust)
• D max Density
• Background Voltage Margin
• Stabilizer
• Monochrome Density Adjustment
52
Field Service Ver. 1.0 Oct. 2007
• Fusing Temperature
• Printer Area
• Color Registration Adjustment
• Lead Edge Erase Adjustment
• Transfer Output Fine Adjustment
• Thick paper Density Adjustment
• TCR Toner Supply
• Dev. Bias Choice