Printer Resist Loop - Konica Minolta bizhub C353P Service Manual

Field Service Ver. 1.0 Oct. 2007
15.8.4

Printer Resist Loop

Functions • To set the correction value of the paper loop length for each process speed of tray 1,
tray 2 to tray 4 / LCT, bypass, and duplex.
• To adjust the length of the loop formed in paper before the registration rollers.
• Use "Paper Passage" for paper passage check.
Use When a paper skew occurs.
When a paper misfeed occurs.
Adjustment To decrease the loop amount: Decrease the setting value
Instructions To increase the loop amount: Increase the setting value
Adjustment • The adjustable range is different depending on paper source and processing speed.
Range
166.6 mm/sec
55 mm/sec
1. Select [Service Mode] → [MachineAdjustment] → [Printer Resist Loop].
Setting/
Procedure 2. Select a paper source and a processing speed.
3. Enter the new setting from the
Tray 1 Tray 2/3/4 LCT
-5 to +5 -5 to +5
-15 to +15 -15 to +15
and keys and press the Menu/Select key.
15. Service Mode
Duplex Manual Tray
-5 to +5 -5 to +5
-8 to +8 -15 to +15
259