Konica Minolta bizhub C353P Service Manual page 247

13. Utility Mode
(5) TRAP Settings
<TRAP Settings>
Functions
• To select whether to allow or restrict TRAP Settings of SNMP.
Use
Setting/ • The default setting is Allow.
Procedure
<TRAP when Auth. Fails>
Functions
• To select whether or not to use TRAP when Auth. Fails.
Use
Setting/ • The default setting is OFF.
Procedure
G. AppleTalk
NOTE
• When Network speed setting is changed, turn off the power switch and turn it on
again more than 10 seconds after.
(1) AppleTalk Setting
Functions • To set whether to enable or disable the AppleTalk setting.
Use • To use AppleTalk setting.
Setting/ • The default setting is OFF.
Procedure
(2) Printer Name
Functions • To set the printer name displayed on the AppleTalk network.
Use • To set the printer name displayed on the AppleTalk network.
Setting/
• Enter the printer name (up to 31 characters) using
Procedure
Menu/Select key.
(3) Zone Name
Functions • To set the zone name connected with AppleTalk network.
Use • To set the zone name connected with AppleTalk network.
Setting/
• Enter the zone name (up to 31 characters) using
Procedure
Menu/Select key.
H. Bonjour
(1) Bonjour Setting
Functions • To set whether or not to use the Bonjour setting.
Use • To use when operating under the Bonjour service environment.
Setting/ • The default setting is ON.
Procedure
202
"Allow"
ON
ON
"ON"
Field Service Ver. 1.0 Oct. 2007
Restrict
"OFF"
"OFF"
and keys, and press the
and keys, and press the
OFF