Option Setting; Maintenance Ctr - Konica Minolta bizhub C353P Service Manual

Hide thumbs Also See for bizhub C353P:

Table of Contents

15. Service Mode

Option Setting

A. HDD Installation

• To set when the hard disk is mounted.

• Use when setting up the hard disk is mounted.

• The default settings are "Unset."

• When the setting has been changed, turn off the power switch and turn it on

again more than 10 seconds after.

• If "Installed" is selected, select [User Settings] → [System Settings] → [Power-

Save Setting] → [SleepMode Setting] and set [SleepMode Setting] to "ON."

• If "Not Installed" is selected, select [User Settings] → [System Settings] →

[PowerSave Setting] → [SleepMode Setting] and set [SleepMode Setting] to

• To set a count value for maintenance of any given part.

• When any given part is replaced.

• Enter the maintenance counter value using

• Counts up when a sheet of paper is fed through the machine.

• Select [Start] and press the Menu/Select key will clear the count.

• Shows the date when the maintenance counter is started.

Field Service Ver. 1.0 Oct. 2007

Table of Contents