Solution; Initial Check Items; Solution When Paper Curl Occurs - Konica Minolta bizhub C353P Service Manual

Hide thumbs Also See for bizhub C353P:
Table of Contents

Advertisement

9. Jam display
9.3

Solution

9.3.1

Initial check items

• When a paper misfeed occurs, first perform the following initial check items.
Check Item
Does the paper meet product specifications?
Is paper curled, wavy, or damp?
Is a foreign object present along the paper path, or is
the paper path deformed or worn?
Are the rolls/rollers dirty, deformed, or worn?
Are the edge guide and trailing edge stop at the cor-
rect position to accommodate the paper?
Are the actuators found operational when checked for
correct operation?
9.3.2

Solution when paper curl occurs

Step
1
Turn over the stacked paper in the paper tray.
Does paper curl occur just after a warm-up has been completed or
the sleep mode has been turned OFF?
2
Does paper curl occur under normal conditions (under conditions
other than those mentioned above)?
1. Call the Service Mode to the screen.
2. Select [System 1] → [Change Warm Up Time].
3
3. Change the setting to [Mode3].
See P.343 of the main body service manual.
1. Call the Service Mode to the screen.
2. Select [System 1] → [Change Warm Up Time].
4
3. Change the setting to [Mode4].
See P.343 of the main body service manual.
1. Call the Service Mode to the screen.
2. Select [Machine] → [Fusing Temperature].
5
3. Select a paper type.
4. Change the temperature of Heater Roller to [-10 °C].
See P.304 of the main body service manual.
1. Call the Service Mode to the screen.
2. Select [Machine] → [Fusing Temperature].
6
3. Select a paper type.
4. Change the temperature of Heater Roller to [-20 °C].
See P.304 of the main body service manual.
40
Field Service Ver. 1.0 Oct. 2007
Change the paper.
See "Solution when paper curl occurs" on P.40.
Clean or change the paper path.
Clean or change the defective roll/roller.
Set as necessary.
Correct or change the defective actuator.
Check items/actions
Action
OK
NG
Go to step 2.
YES
Go to step 3.
YES
Go to step 5.
OK
NG
Go to step 4.
OK
NG
Go to step 6

Advertisement

Table of Contents
loading

Table of Contents