Initialize; Foolscap Size; Don't Go To Sleep - Konica Minolta bizhub C353P Service Manual

15. Service Mode
15.3.3

Initialize

A. Data Clear
Functions • To initialize the setting data.
Use • To clears the setting data.
For details on items to be cleared, see "Contents to be cleared by reset function."
See P.385
NOTE
• When removing or installing the hard disk after registering the data below, be
sure to clear the data.
Referring data: One-touch registration, user authentication/account track.
Setting/ 1. Select the key as follows.
[Service Mode] → [System Settings] → [Initialize] → [Data Clear] → [Start].
Procedure
2. Press the Menu/Select key.
3. When [Completed. Please turn power OFF and ON.] is displayed, turn off the power
switch and turn it on again more than 10 seconds after.
B. System Error Clear
Functions • To reset the trouble data.
Use • Use to clear the [Jam], [Trouble], [Error] displays, and other improper displays.
For details on items to be cleared, see "Contents to be cleared by reset function."
See P.385
Setting/ 1. Call the Service Mode to the screen.
Procedure 2. Select the key as follows.
[Service Mode] → [System Settings] → [Initialize] → [SystemError Clear] → [Start].
3. Press the Menu/Select key.
4. When [Completed. Please turn power OFF and ON.] is displayed, turn off the power
switch and turn it on again more than 10 seconds after.
15.3.4

Foolscap Size

Functions • To set the size for foolscap paper.
Use • Upon setup.
• To change the size for foolscap paper.
Setting/ • Select the size from among the following five.
Procedure
220x330mm
15.3.5

Don't go to Sleep

Functions • To display the option of "OFF" for the sleep mode setting screen available from user
settings.
Use • To display the option of "OFF" for the sleep mode setting.
NOTE
• The sleep mode will begin in 48 hours even if it sets it to "OFF."
Setting/ • The default setting is "Restrict."
Procedure
236
8 1/2x13 8 1/4x13
Allow
Field Service Ver. 1.0 Oct. 2007
8 1/8x13 1/4 8x13
"Restrict"