Konica Minolta bizhub C353P Service Manual page 331

15. Service Mode
(7) AT command
Functions • To set the command to be issued at the time of modem initialization.
• This setting is available only when [Modem] is selected for the system setting.
Use • To set the command to be issued at the time of modem initialization.
Setting/
• Enter the command and press the Menu/Select key to register.
Procedure
D. Server Settings
• Server Settings can be set only when [E-mail] is selected by System Settings.
(1) RX Server
<POP3 server>
Functions • To set the POP3 server address used for the CS Remote Care.
Use • To set the address of the POP3 Server.
• POP3 server address can be set with IP address or the domain name.
Setting/ <Enter IP address>
Procedure • IP address version 4 format
[0 to 255].[0 to 255].[0 to 255].[0 to 255]
<Enter FQDN>
• Enter the domain name.
<POP3 Login Name>
Functions • To set the logon name for the POP3 server used for the CS Remote Care.
Use • To set the logon name for the POP3 server.
Setting/ • The default setting is No.
Procedure • Up to 64 characters (alphanumeric characters and symbols) can be used.
<POP3 Password>
Functions • To set the logon password for the POP3 server used for the CS Remote Care.
Use • To set the logon password for the POP3 server.
Setting/ • The default setting is No.
Procedure • Up to 15 characters (alphanumeric characters and symbols) can be used.
<POP3 Port Number>
Functions • To set the POP3 port number used for the CS Remote Care.
Use • To set the port number for the POP3 server.
Setting/ • The default setting is 00110.
Procedure
286
Field Service Ver. 1.0 Oct. 2007
"00110" (1 to 65535)