Konica Minolta bizhub C353P Service Manual page 119

10. Firmware upgrade
10. Select the drive that the compact flash is inserted, which is confirmed at step 3.
NOTE
• The drives other than the compact flash that is recognized as "Removable Disk"
can be selected for the writing destination. If these drives are selected mistakenly
to make the writing, it may give fatal damage on Windows system or delete the
saved data. Therefore pay close attention when selecting the drive.
11. [Write] button is changed form gray into active status.
When clicking [Write] button, the following dialog is displayed.
12. In the dialog, re-confirm the firmware data and the written destination drive, and click
[YES].
(If [NO] is clicked, the screen goes back of the main window.)
13. Click [Yes], and data writing starts.
NOTE
• Writing a card is a resource intensive operation for your computer - do not attempt
to multitask (use the computer for anything else) during the writing procedure.
74
Field Service Ver. 1.0 Oct. 2007
9J06F2E715DA
9J06F2E716DA