Admin. Auth Lock Rel; Release Time - Konica Minolta bizhub C353P Service Manual

Hide thumbs Also See for bizhub C353P:
Table of Contents

Advertisement

Field Service Ver. 1.0 Oct. 2007
15.12.4

Admin. Auth Lock REL

Functions
• To release an access lock that is activated after an administrator password authenti-
cation.
Use
• To release the access lock with service authority when an administrator password
authentication fails and the access lock is activated.
• When the power switch is turned OFF and ON or the period of time set in the
Release Time Settings elapses, the machine releases the access lock that is acti-
vated after the administrator password authentication.
In addition to these operations, this setting provides another way to release the
access lock.
1. Select [Admin.AuthLockREL] → [Start].
Setting/
Procedure
2. Press the Menu/Select to release an access lock.
3. When [OK] is displayed, press the Menu/Select key.
15.12.5

Release time

Functions
• To set the time that elapses before the machine releases an access lock that is acti-
vated after the CE password authentication.
Use
• To set the period of time that elapses before the machine releases the access lock,
which aims to prevent the unintentional release of the access lock.
• If the machine is set into an access lock state as a result of CE Authentication, turn
power ON with the Menu/Select key held down; then, on the Trouble Reset screen,
press
timer (set by the release time function).
The access lock state is thereafter released when the period of time set in this func-
tion elapses.
NOTE
• If the access lock state is released through the above procedure, do not turn
power OFF until the time elapses as set through [Service Mode] → [Security
Settings] → [Release time]. If the power is turned OFF before the timer set for
release time expires, the lock release operation becomes invalid.
Setting/
• The default setting is 05 Min.
Procedure
NOTE
• When Enhanced Security is set to ON in [Admin. Settings] → [Security Set-
tings] → [EnhancedSecurity], the period of time that can be set in this setting
is 5 minutes or more.
1 to 60 Min.
15. Service Mode
. This starts the access lock release
273

Advertisement

Table of Contents
loading

Table of Contents