Field Service Ver. 1.0 Oct. 2007
[2]
[1]
11.3.28
DC power supply (DCPU)
• Remove the DC power supply after six minutes or more have passed
since the power plug was disconnected.
1. Remove the left cover.
See P.97
2. Remove the rear left cover.
See P.98
[2]
[3]
[4]
[3]
[3]
[1]
[2]
A02EF2C132DA
CAUTION
[1]
[2]
A02EF2C133DA
[1]
[2]
[1]
A02EF2C134DA
9. Remove two screws [1] and six tabs
[2], and remove the PH relay board
[3].
3. Disconnect the connector [1].
4. Remove thirteen screws [2], and
remove the DC power supply protec-
tive shield [3].
5. Remove the harness from three wire
saddles [1].
6. Remove the harness from the cover
[2].
7. Remove the screw [3], and remove
the cover [4].
11. Other
125