Konica Minolta bizhub C353P Service Manual page 572

Field Service Ver. 1.0 Oct. 2007
B. Settings dialog
• It will be displayed by clicking [Settings] at main window.
• Other settings will be enabled by selecting the check box of [Enabled Advanced Fea-
tures].
[1]
[1] Enable Advanced
Features
[2] Default Setting for Card
Format
[3] Default Drive Letter
[4] Default Image Block Size
[5] Calculate sums when
writing
[6] Folder for Temporary Files • Set the folder for saving temporary files during the tool is acti-
2. Checking the controller firmware version
• Enable the setting of advanced functions at the dialog by select-
ing the check box.
Also advanced functions can be selected at the main window.
• Select the default card format during software starting.
FAT : The format to be used by all models that the soft-
ware supports.
vxWorks : Not available yet.
• Select how to set default of compact flash drive during software
starting.
LastUsed : The drive used at previous time is selected.
None : [Please Select] is displayed on the screen every
starting and the drive should be selected every
time.
• Not available yet.
• Set whether to calculate check sums during data writing.
• If [YES] is selected, data consistency can be ensured by data
verification of check sums during data writing. However, it takes
more time for data writing compared to the case without sums
calculation. (Basically this mode shall be selected.)
• If [No] is selected, check sums calculation is skipped during
data writing. Although it take less time for data writing com-
pared to the case with sums calculation, it fails to ensure the
reliability of the written data.
vating. The temporary file is automatically deleted after the
operation completes normally.
[1]
9J06F2E705DA
[2]
[3]
[4]
[5]
[6]
11