Konica Minolta bizhub C353P Service Manual page 623

7. Mechanical adjustment
8. Repeat steps 1 to 7 similarly for the paper feed tray 4.
9. Click [END].
10. Click [Exit] on the Service Mode screen.
11. Turn OFF the power switch, then wait for 10 sec. or more and turn ON the power
switch.
24
A
4061F3C809DA
Field Service Ver. 1.0 Oct. 2007
5. Measure the width of printed refer-
ence line A.
Specification: 3.0 mm
6. If the measured width A falls outside
the specified range, enter the correc-
tion value using the [-] or [+] key.
7. Produce another test print and check
to see if width A falls within the spec-
ified range.
±
2.0 mm