Konica Minolta bizhub C353P Service Manual page 223

13. Utility Mode
(3) Auto Tray Switch
Functions • To set whether to automatically switch to another tray with same size paper when the
paper feed tray runs out of paper during printing.
Use • To switch the paper feed tray automatically.
Setting/ • The default setting is OFF.
Procedure
(4) No Matching Paper
Functions • To set whether to switch to another tray automatically when the specified tray runs
out of paper during printing.
Use
Stop Printing
Switch Trays
Setting/ • The default setting is Stop Printing.
Procedure
D. Output Settings
(1) Print/Fax Output
Functions • To set the timing for printing for the PC print job received.
Use Page Print : Starts printing every time data for each page are received
Batch Print : Starts printing when all data are received
Setting/ • The default setting is Page Print.
Procedure
(2) Blank Page Print
Functions • Select wether or not to print the stamp/composition on blank pages.
Use • To print a stamp/composition on blank pages.
Setting/ • The default setting is Do Not Print.
Procedure
(3) Output Tray
• It will be displayed only when the optional finisher FS-519 is mounted.
Functions • To set the priority output tray.
Use • To change the prior output tray according to the application.
Setting/ • The default settings is Finisher Tray 1.
Procedure
178
ON
: It stops printing when the specified tray runs out of paper.
: To switch to another tray with the specified paper and print when
the tray is out of paper
"Stop Printing"
"Page Print"
Print
"Finisher Tray 1" Finisher Tray 2
Field Service Ver. 1.0 Oct. 2007
"OFF"
Switch Trays
Batch Print
"Do Not Print"
Finisher Tray 3