16. Jig Software
16.13.11 Color Regist
Functions
• To check each of C, M, and Y for color shift amount.
• The data is updated after a color shift correction has been made or color shift adjust-
ment has been completed.
Use
• Use for check when color shift is evident.
• Use for adjustment of PH skew.
Setting/
• For each of C, M, and Y, the color shift amount (in X and Y directions) at two locations
Procedure
(one at the front and the other in the rear) and the difference in color shift amount
between the front and rear (X and Y directions) are displayed.
• Display unit: dots
• The shift amounts is displayed with reference to K for C, M and Y, and that for K is
displayed with reference to an ideal position.
16.13.12 IU Lot No.
Functions
• To display the 10-digit lot number for each of Cyan, Magenta, Yellow, and Black IUs.
• The lot number data is stored in EEPROM of each IU.
Use
• Use for checking the IU Lot No.
16.13.13 Adjustment Data List
Functions
• To display the adjustment and setting value set in the main body.
Use
• Use to check the adjustment and setting value set in the main body.
368
Field Service Ver. 1.0 Oct. 2007