15. Service Mode
15.4 Clear Counter
15.4.1
Yield Counter
Functions
• To clear the count of each counter.
Use
• When each of the maintenance parts is replaced.
Setting/
• To clear the count of a counter, select the specific part and then select [Start] and
Procedure
press the Menu/Select key.
• Bypass
• Tray 1
• Tray 2
• Tray 3
• Tray 4
• LCT
• Finisher
15.4.2
JAM
Functions
• To clear the count of each counter.
Use
• To clear the number of paper misfeeds that have occurred.
Setting/
• Select [Start] and press the Menu/Select key.
Procedure
15.4.3
Counter Service Called
Functions
• To clear the count of each counter.
Use
• To clear the number of malfunctions that have occurred.
Setting/
• Select [Start] and press the Menu/Select key.
Procedure
15.4.4
Warning
Functions
• To clear the count of each counter.
Use
• To clear the number of warning conditions that have been detected.
Setting/
• Select [Start] and press the Menu/Select key.
Procedure
15.4.5
Counter for Mode
Functions
• To display the printed pages in the following specified modes; printer. It also displays
the count value of using the specified mode.
Use
• Use to clear the printed pages in the following specified modes; printer, as well as
No. of times each mode was used, in order to know the using condition.
• Select [Start] and press the Menu/Select key.
246
Field Service Ver. 1.0 Oct. 2007
: Number of sheets of paper fed from the bypass
: Number of sheets of paper fed from tray 1
: Number of sheets of paper fed from tray 2
: Number of sheets of paper fed from tray 3
: Number of sheets of paper fed from tray 4
: Number of sheets of paper fed from the LCT
: Number of sheets of paper fed out of the finisher