Fusing Transport Speed - Konica Minolta bizhub C353P Service Manual

Field Service Ver. 1.0 Oct. 2007
16.5.2

Fusing Transport Speed

Functions • To adjust the speed of the fusing drive motor so as to match the fusing speed with
transport speed.
Use • Brush effect or blurred image is evident as a result of changes in environmental con-
ditions or degraded durability.
Variable
Range
Adjustment If brush effect is evident, vary the setting value and check for image.
Instructions If a blurred image occurs, decrease the setting.
Setting/ 1. Call the Service Mode to the screen.
2. Click these keys in this order: [Machine] → [Fusing Transport Speed].
Procedure
3. Select the transport speed, at which the brush effect or blurred image has occurred.
Transport speed
166.6 mm/s
55.5 mm/s
4. Enter the new setting from the 10-key pad.
5. Click [END] to validate the adjustment value.
6. Check the printed image for any image problem.
-20 to +20 (in 1 increments)
Plain paper: color/monochrome, OHF film
Thick 1, Thick 2, Thick 3, Thick 4, envelope, postcard:
monochrome/color
16. Jig Software
Paper Setting
305