18. Mechanical Adjustment - Konica Minolta bizhub C353P Service Manual

Hide thumbs Also See for bizhub C353P:

Table of Contents

18. Mechanical adjustment

18.1 Mechanical adjustment of the paper feed section

Skew adjustment of the tray 1, 2

This adjustment must be made in the following case:

• To reduce paper skew that cannot be corrected by the registration loop adjust-

ment when the tray 1 or 2 is within the specifications.

1. Pull out the tray where this adjustment is made.

2. Load the tray with the paper.

3. Move the set of the paper guides [1]

A02EF2C525DA

4. Remove the paper from the tray.

5. Secure the set of paper guides [1] on

A00KF3C513DA

Field Service Ver. 1.0 Oct. 2007

until no gap is produced between the

both ends of paper and the paper

the tray using a screw (M3 x 8 mm:

V121 0308 04).

Table of Contents