Field Service Ver. 1.0 Oct. 2007
11.3.29
Printer control board (PRCB)
1. Open the front door.
2. Remove the rear left cover.
See P.98
3. Remove the upper rear cover.
See P.100
[2]
[1]
[1]
[1]
[1]
[2]
A02EF2C377DA
[1]
A02EF2C379DA
[2]
A02EF2C381DA
4. Remove seven screws [1], and
remove the protective shield/2 [2].
5. Remove ten screws [1], and remove
the protective shield/1 [2].
6. Disconnect the flat cable [1].
7. Remove the flat cable [1] from three
cable holders [2] and get the flat
cable out of the way.
11. Other
127