Exhaust Fan Stop Delay; Ld Adjustment - Konica Minolta bizhub C353P Service Manual

Hide thumbs Also See for bizhub C353P:

Table of Contents

Field Service Ver. 1.0 Oct. 2007

Exhaust Fan Stop Delay

• To set the period of time before the exhaust fan motor stops.

• At the completion of a print job/image stabilization or at jam/malfunction, the fan

motor rotating at full speed comes to a stop. The period of time before the fan motor

stops can be delayed so that ozone left around the PC drum can be discharged.

• 0 to 15 (minutes) can be entered with the ten-key pad. (Default is 0.)

• When this setting is set to 0 (minute), the fan motor runs for 5 seconds before

A. LD delay adjust.

16. Jig Software

Table of Contents