System 1; Marketing Area; Serial Number; No Sleep - Konica Minolta bizhub C353P Service Manual

Hide thumbs Also See for bizhub C353P:

Table of Contents

16. Jig Software

16.9 System 1

• To make the various settings (language, paper size, fixed zoom ratios, etc.) according

to the applicable marketing area.

• Upon setup.

• Select the applicable marketing area and click [END] to set the marketing area.

✽ These are the languages that can be selected on the Utility screen according to dif-

ferent marketing area settings:

• To register the serial numbers of the machine and options.

• The numbers will be printed on the list output.

• To use the serial number as Machine ID during CS Remote Care communication.

• Upon setup.

• When power switch was turned ON while the serial No. was not entered, the

message to require entering the serial No. will be displayed.

• Do not change the serial number registered in the machine. If memory data is

lost and entering the serial number is required, enter the original correct serial

Be careful to enter the correct serial number since characters other than

alphanumeric can be also entered. CSRC communication is not available if a

wrong serial number is entered.

• Type the serial numbers.

Printer, LCT, Sorter/FN, Duplex

• To display the option of "OFF" for the sleep mode setting screen available from

admin. settings.

• To display the option of "OFF" for the sleep mode setting.

• The sleep mode will begin in 48 hours even if it sets it to "OFF."

• The default setting is "Prohibit."

Others1 Others2 Others3 Others4

English, French, German, Italian, Spanish,

Dutch, Portuguese, Czech, Japanese

Field Service Ver. 1.0 Oct. 2007

Table of Contents