Using The Embedded Web Server; Printing The Menu Settings Page; Printing The Network Setup Page - Konica Minolta bizhub 3622 User Manual

Learning about the printer
Sleep button light
Off
Solid amber
Blinking amber

Using the Embedded Web Server

Note: This functionality is available only in network printers or printers connected to print servers.
Use the Embedded Web Server to:
•
Check printer supplies status.
•
Configure supply notifications.
•
Configure printer settings.
•
Configure network settings.
•
View reports.
To access the Embedded Web Server for your printer:
1
Obtain the printer IP address by printing the network setup page or menu settings page, and then finding
the TCP/IP section.
For more information, see
Notes:
•
The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the web page correctly.
2
Open a web browser, and then type the printer IP address in the address field.
3
Press Enter.

Printing the Menu Settings Page

1
From the control panel, navigate to:
> Settings >
2
Select Menu Settings Page, and then press

Printing the Network Setup Page

1
From the control panel, navigate to:
> Settings >
2
Select Network Setup Page, and then press
Printer status
The printer is off, ready, or processing data.
The printer is in Sleep mode.
The printer is in Hibernate mode.
"Printing the Network Setup Page" on page
> Reports >
> Reports > > Network >
.
.
14.
14