Config Ssh Server - D-Link xStack Reference Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Example
To update user "danilo" in authentication mode:
DGS-3620-28SC:admin#config ssh user danilo authmode publickey
Command: config ssh user danilo authmode publickey
Success.
DGS-3620-28SC:admin#
96-6 show ssh user authmode
Description
This command is used to display SSH user information.
Format
show ssh user authmode
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To show user information about SSH configuration:
DGS-3620-28SC:admin# show ssh user authmode
Command: show ssh user authmode
Current Accounts
User Name Authentication
-------------- ---------------
test
alpha
beta
Total Entries : 3
DGS-3620-28SC:admin#
96-7

config ssh server

Description
This command is used to configure SSH server general information.
Public Key
Host-based
Host-based
Host Name
---------------
alpha-local
beta-local
1084
Host IP
-------------
172.18.61.180
3000::105