Show Snmp Host; Show Snmp V6Host - D-Link xStack Reference Manual

Dgs-3620 series layer 3 managed stackable gigabit switch
Hide thumbs Also See for xStack:
Table of Contents

Advertisement

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3620-28SC:admin#

94-18 show snmp host

Description
This command is used to display the recipient for which the traps are targeted.
Format
show snmp host {<ipaddr>}
Parameters
<ipaddr> - (Optional) Specify the IP address of the recipient for which the traps are targeted.
Note: If no parameter is specified, all SNMP hosts will be displayed.
Restrictions
None.
Example
To display the receipient for which the traps are targeted:
DGS-3620-28SC:admin#show snmp host
Command: show snmp host
SNMP Host Table
Host IP Address
SNMP Version
---------------
---------------
10.90.90.6
V2c
Total Entries: 1
DGS-3620-28SC:admin#

94-19 show snmp v6host

Description
This command is used to display the recipient for which the traps are targeted.
Format
show snmp v6host {<ipv6addr>}
Community Name / SNMPv3 User Name
---------------------------------
community3
1061
UDP Port
--------
162

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xstack dgs-3620-28sc

Table of Contents