Show Controllers Backplane Ethernet Local Brief - Cisco ASR 9000 Series Manual

Internal Ethernet Control Network Commands on the Cisco ASR 9000 Series Router

show controllers backplane ethernet local brief

To display brief information about the Ethernet interface that connects the node to the router control Ethernet,
use the show controllers backplane ethernet local brief command in EXEC mode.
show controllers backplane ethernet local brief
Syntax Description
This command has no keywords or arguments.
Command Modes
EXEC
Command History
Release
Release 3.7.2
Usage Guidelines
Examples The following example shows the output from the show controllers backplane ethernet local brief command:
RP/0/RSP0/CPU0:router# show controllers backplane ethernet local brief
FastEthernet0_RP1_0 (local) is up, MTU 1514 bytes
RP/0/RSP0/CPU0:router#
Table 1: show controllers backplane ethernet local brief Field Descriptions
Field
MTU
packets input
packets output
Related Commands
Command
show controllers backplane ethernet local clients, on page 5
show controllers backplane ethernet local detail, on page 7
OL-24762-01
561688 packets input, 53760372 bytes
683424 packets output, 216565877 bytes
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference
show controllers backplane ethernet local brief
Modification
This command was introduced.
Description
Maximum packet size, in bytes, that a particular
interface can handle.
Total number of packets received.
Total number of packets transmitted.
Description
3